Denon AVR-1712 - Remote Control Battery and Range; Inserting Remote Control Batteries; Remote Control Operating Range; Remote Control Interference Notes

82
Display
u yioQ0Q1Q2Q3Q4
wq e r t
q Decoder indicators
These light when the respective decoders are operating.
w Input signal indicators
e Information display
The input source name, surround mode, setting values and other
information are displayed here.
r Front speaker indicator
This lights according to the setting of the front A and B speakers.
t Multi-zone indicators
This lights up when ZONE2 (separate room) power is turned on
(vpage45).
y Master volume indicator
u Sleep timer indicator
This lights when the sleep mode is selected (vpage42, 46).
i MUTE indicator
This lights when the mute mode is selected (vpage21).
o Audyssey
®
indicators
Light up as follows, depending on the setting of “MultEQ
®
XT”,
(vpage 55), “Dynamic EQ
®
” (vpage 56) and “Dynamic
Volume
®
” (vpage56).
When “MultEQ
®
XT”, “Dynamic EQ
®
” and
“Dynamic Volume
®
” are “ON”.
When “MultEQ
®
XT” and “Dynamic EQ
®
” are
“ON” and “Dynamic Volume
®
” is “OFF”.
When “MultEQ
®
XT” is “ON” and “Dynamic EQ
®
”
and “Dynamic Volume
®
” are “OFF”.
Q0 Surround back indicator
This lights when audio signals are being output from the surround
back speakers (vpage60).
Q1 Input mode indicators
Set the audio input modes for the different input sources
(vpage72).
Q2 RESTORER indicator
This lights when the RESTORER mode is selected (vpage57).
Q3 HDMI indicator
This lights when playing using HDMI connections.
Q4 Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “TUNER”.
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
Basic version
Advanced version
InformationInformation