Denon AVR-1906 Operating Instructions

ENGLISH
50
Advanced Setup – Part 2 Advanced Setup – Part 2
ENGLISH
PageDefault settingAdvanced Playback
4. Advanced Playback
PageDefault settingOption Setup
5. Option Setup
1 Audio Delay
Auto
Surround
Mode
2
Sets the audio delay to delay the sound and synchronize it
with the picture.
Sets the Auto surround mode function.
0 ms
Auto Surround Mode = ON
43
43
Power Amp
Assign.
Set this to switch the surround back channel’s power
amplifier for ZONE2 or Bi-Amp use.
Surround Back
44
1
On Screen
Display
This sets whether or not to display the on-screen display
that appears on the monitor screen when the controls on
the remote control unit or main unit are operated.
A setting to prevent flickering.
2
Muting Level
3
44
4
This sets the amount of attenuation for audio output
muting.
44
– – – dB (minimum)
On Screen Display = ON / MODE1
Setup Lock
Sets whether or not to lock the system setup settings so
that they cannot be changed.
45
Setup Lock = OFF

Denon AVR-1906 Specifications

Power Amplifier Section

front power output (8 ohms)	85 W + 85 W
front power output (6 ohms)	120 W + 120 W
center power output (8 ohms)	85 W
center power output (6 ohms)	120 W
surround power output (8 ohms)	85 W + 85 W
surround power output (6 ohms)	120 W + 120 W
surround back power output (8 ohms)	85 W + 85 W
surround back power output (6 ohms)	120 W + 120 W

Preamplifier Section

input sensitivity/impedance	200 mV/47 kohms
output level/load impedance	SUBWOOFER 1.2 V/10 kohms
frequency response	10 Hz - 100 kHz (+1, -3 dB)
signal-to-noise ratio	98 dB (IHF-A weighted)
tone control treble	±12 dB at 10 kHz
tone control bass	±12 dB at 100 Hz

FM Section

tuning frequency range (FM)	87.5 - 107.9 MHz
usable sensitivity (FM)	1.0 µV (11.2 dBf)

AM Section

tuning frequency range (AM)	520 - 1710 kHz
usable sensitivity (AM)	18 µV

General

power supply	AC 120 V, 60 Hz
power consumption	5.1 A
dimensions	434 (W) x 147 (H) x 417 (D) mm
weight	11.7 kg