ENGLISH
[Video]
Symptom
No picture
appears.
Picture cannot
be
recorded.
DVDs
cannot be
copied
on
a
VCR.
On-screen
display
is
not
shown.
cause
•
The
connections between the
AVR-1909
and
monitor
are
faulty.
•
The
monitor's input setting
is
wrong.
•
PURE
DIRECT
mode
is
set.
•
The
player
is
connected using the
component input connectors, the
monitor
is
connected using the
video (yellow) or S-Video output
con
nectors.
• Input source does not match
recorder's video connection
connector (video or S-Video).
•
The
operation content display
is
"OFF':
•
The
main volume display
is
"OFF':
•
The
display during tuner operation
is
"OFF':
•
The
display during
iPod
operation
is
"OFF':
COuntenneasure
• Check the connections.
• Set properly.
• Cancel the
PURE
DIRECT
mode.
• High definition (1080i/720p)
and
progressive (480p/576p) video
signals
are
not down-converted.
Set the player to interlace
(480i/576i) signals.
•
The
video conversion function
does not work for the
REC
OUT
connectors. Match the
input source
and
recorder
connections.
• This
is
not a malfunction. Most
movie software includes copy
prevention signals
and
cannot
be
copied.
• When viewing HDMI or
component video signals
via
the
AVR-1909,
the on-screen display
appears when the
MENU
button
on
the main unit
or
the
A.MENU
button
on
the main remote
control unit.
• When only HDMI or component
video signals
are
input to the
AVR-1909,
the characters of
the on-screen display
are
not
displayed over the picture.
• Set "Manual Setup" - "Option
Setup" - "On-Screen Display"
- "Text" to
"ON':
• Set "Manual Setup" - "Option
Setup" - "On-Screen Display"
- "Master Volume" to
"ON':
• Set when "Manual Setup"
- "On-Screen Display" - "Tuner
Information"is not "OFF':
• Set when "Manual Setup"
- "On-Screen Display" - "
iPod
Information"
is
not "OFF':
Page
12
-
16
46
15
9
9
36
36
36
36
[HDMI]
Symptom
cause
Countenneasure
Page
HDMI audio
• The "Manual Setup" - "HDMI
• Set to "Amp"
32
signals
are
not
Setup
"
-
"HDMI
Audio
Out"
output from
setting
is
set to"TV"
speakers.
No
picture
• The connections to the HDMI
• Check the connections.
12
appears
connectors
are
faulty.
with HDMI
• HDMI input setting
is
improper.
• Check the HDMI input setting. 42
connections.
•
The
monitor
is
not compatible
• Connect
a
monitor that
is
12
with copyright
protection compatible with copyright
(HDCP)
protection
(HDCP).
• The HDMI format of the player • Match the HDMI format
of
the
12
and
monitor do not match.
player
and
monitor.
No
sound
is
.The
"Manual Setup" - "HDMI
• Set to "TV':
32
output from
Setup
"
-
"HDMI
Audio
Out"
the monitor
setting
is
set to "Amp':
connected
with HDMI
connections.
When performing
• HDMI's
CEC
function
is
• Set "Manual Setup" - "HDMI 32
the following operating.
Setup"
- "HDMI
Control"
to
operations
on
a
"OFF"
connected device, When
you
only want to operate
AVR-1909
has
the
the power on/off
each
device, set
same operations. "Power Off Control" to "OFF':
·Power ON/OFF
·Switching audio
output devices
·Adjust volume
·Switch input
source
C>
'"
~
3'
'"
~
.,
~
~
~
I--
i
()
I g
I "
i
~
I
g.
i
~
r--;
I
'"
I
...
I
l::
I
."
r-:;;-
I _
I
~
I
~
r-;;-
I
'"
I 3
I 0
I
;;r
:
~
;:;
2.
84
To Next Page
Loading...
Need help?
General
