Denon AVR-1913 - Audio Block Diagram; fig.7

38
Listening to FM broadcasts
For antenna connections, see “Connecting an FM antenna”
(vpage20).
How to tune in
The modes for receiving FM broadcasts consists of “Auto” mode
that automatically searches available broadcast stations and “Manual”
mode that lets you tune in using buttons to change the frequency. The
default setting is “Auto”. You can also use “Direct Tune” to tune in by
entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is
not good. If this is the case, then use the “Manual” mode or “Direct
Tune” to tune in.
Listening to FM broadcasts
1
Press FM to switch the input
source to “FM”.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
FM
CH 1 FM 87.50MHz
Now Playing
Tune Preset Option
GDisplay of this unitH
01 FM 87.50MHz
2
Press TUNE + or TUNE – to select the station you
want to hear.
Scanning is performed until it finds an available radio station.
When it finds a radio station, it stops the scan automatically
and tunes in.
n Adding to the FAVORITES STATION button
(vpage63)
Operations available through the OPTION button
Press the OPTION button to display a menu of functions that can be
used on the TV screen. Select the function you want to use from this
menu. You can easily find and use the desired function.
n Changing the tuning mode (Tune Mode)
(vpage39)
n Tuning in by entering the radio frequency
(Direct Tune) (vpage40)
n Tuning in to radio stations and presetting them
automatically (Auto Preset Memory) (vpage41)
n Presetting the current broadcast station
(Preset Memory) (vpage42)
n Specify a name for the preset broadcast station
(Preset Name) (vpage43)
n Skipping preset broadcast stations
(Preset Skip) (vpage44)
Basic version
Advanced version
Information
Basic version
v See overleaf
DVD