Denon AVR-1913 - DDC_CLK;DDC_DATA;TMDS: Check Items HDMI to HDMI (17);(19);(24); Timing Waveform Illustration from the Start of CEC3.3 V to When Reset Is Released: Check Items (22)

88
Quick select function
You can save settings such as the input source selection, volume
level, and sound mode at the QUICK SELECT 1 – 4 buttons.
You can simply press one of the set QUICK SELECT buttons for
subsequent playback to switch to various saved settings all at once.
•By saving frequently used settings at the QUICK SELECT 1 – 4
buttons, you will always be able to easily call up the same playback
environment.
1
Press MAIN to switch the zone
mode to the MAIN ZONE.
MAIN lights.
2
Press QUICK SELECT.
The Quick Select settings for the button you pressed are called
up.
•The default settings of each QUICK SELECT are as shown below.
Button Input source Volume
Sound
Mode
QUICK SELECT 1 CBL/SAT 40 STEREO
QUICK SELECT 2 Blu-ray 40 STEREO
QUICK SELECT 3 GAME 40 STEREO
QUICK SELECT 4 NETWORK 40 STEREO
Changing the Quick Select Name
On this unit, you can change the Quick Select name displayed on the
menu to the name that you prefer.
For the name change method, see “Quick Select Names”
(vpage121).
n Changing the settings
1
Press MAIN to switch the zone
mode to the MAIN ZONE.
MAIN lights.
2
Set the items below to the settings you want to save.
q Input source
z
(vpage30)
w Volume (vpage31)
e Sound Mode (vpage67)
r Audyssey
(Audyssey MultEQ
®
, Audyssey Dynamic EQ
®
, Audyssey
Dynamic Volume
®
) (vpage102)
3
Press and hold the desired QUICK SELECT until
“Quickz Memory” appears on the display.
The current settings will be memorized.
z The number for the
QUICK SELECT button you pressed is
displayed.
Basic version
Advanced version
Information
Advanced version
DVD