To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why is there no sound from my Denon Stereo Receiver surround speakers?
If your Denon Stereo Receiver is not producing sound from the surround speakers, set the surround mode to a surround playback mode, as it might be set to “STEREO”, “DIRECT” or “PURE DIRECT”.
How to troubleshoot no sound from surround back speaker on Denon AVR-2310 Stereo Receiver?
If there is no sound being produced from the surround back speaker of your Denon Stereo Receiver, check the following: * Ensure the surround back speaker’s power amplifier is assigned to the correct channel. * Verify that the “S.Back” setting is not set to “None”. * Confirm that the “Audio/Video Adjust” – “Audio Adjust” – “Surround Back” settings are not set to “OFF”. * Ensure the surround mode is set to a mode for 6.1- or 7.1-channel playback.
Why is there no sound from the center speaker on my Denon Stereo Receiver?
If your Denon Stereo Receiver isn't producing sound from the center speaker, and you are playing a monaural source (TV, etc.) in the “STANDARD” (Dolby/DTS Surround) mode, set the mode to something other than “STANDARD” (Dolby/ DTS Surround).
How do I fix no DTS sound on my Denon Stereo Receiver?
If your Denon Stereo Receiver is not producing DTS sound, set the Blu-ray Disc player / DVD player. For details, refer to the Blu-ray Disc player / DVD player’s operating instructions. Use a DTS-compatible player and set to the “Auto” or “DTS” mode.
Why is there no sound from my Denon Stereo Receiver subwoofer?
If your Denon Stereo Receiver is not producing sound from the subwoofer, ensure the subwoofer is powered on, the “Subwoofer” setting at “Speaker Config.” is set to “Yes”, the subwoofer is properly connected, and the subwoofer's volume is appropriately adjusted.
Why won't my Denon Stereo Receiver turn on?
If your Denon Stereo Receiver isn't turning on, or turns off immediately after being turned on, check the power cord to ensure it is properly connected.
How to fix no sound from Denon AVR-2310 Stereo Receiver speakers?
If no sound is coming from the speakers connected to your Denon Stereo Receiver, check the following: * Ensure the input devices and speaker cables are correctly connected. * Verify that the selected input source matches the device you're trying to play. * Adjust the master volume to an audible level. * Deactivate mute mode. * Disconnect any connected headphones. * Confirm that digital signals are being input, and the connectors and input modes match.
General| Equalizer | Yes |
|---|---|
| Product color | Black |
| Impedance | 8 Ω |
| Frequency range | 10 - 100000 Hz |
| Total Harmonic Distortion (THD) | 0.05 % |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| S-Video inputs quantity | 7 |
| Component video (YPbPr/YCbCr) in | 3 |
| Dimensions (WxDxH) | 431 x 377 x 171 mm |
| HDMI ports quantity | 5 |
| Connectivity technology | Wired |
| Headphone connectivity | 3.5 mm |
| S-Video outputs quantity | 2 |
| Digital audio optical out | 1 |
Weight and Dimensions| Weight | 11200 g |
|---|
