Denon AVR-3312 Service Manual

70
Error
Code
Details of Error code Display Coping strategies
37
Line, etc., is busy when logging into
DPMS when rmware such as Sub
CPU, DSP, FPGA, and PLD was
rewritten.
S e r v e r i s b u s y
3 7
Carry out the update in an environment
that has little network load.
38
Connection to DPMS failed when
rmware such as Sub CPU, DSP,
FPGA, and PLD was rewritten..
C o n n e c t i o n f a i l
3 8
Check the network connection.
Carry out the update in an environment
that has little network load.
39
Connection to DPMS timed out
when rmware such as Sub CPU,
DSP, FPGA, and PLD was rewritten.
C o n n e c t i o n f a i l
3 9
Check the network connection.
Carry out the update in an environment
that has little network load.
3A
Error (NG) message was received
when rmware was downloaded or
Main CPU was rewritten.
D o w n l o a d f a i l
3 A
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
3B
Error (line congestion) message
received when rmware was
downloaded or Main CPU was
rewritten.
D o w n l o a d f a i l
3 B
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
3C
Error (connection failure) message
received when rmware was
downloaded or Main CPU was
rewritten.
D o w n l o a d f a i l
3 C
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
3D
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM860 (AutoIP).
C o n n e c t i o n f a i l
3 D
Check the network connection.
Carry out the update in an environment
that has little network load.
3E
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM860 (when timed out).
C o n n e c t i o n f a i l
3 E
Check the network connection.
Carry out the update in an environment
that has little network load
50
Log-in to DPMS failed when
rmware such as Sub CPU, DSP
and PLD was rewritten.
S u b * * * m i n
L o g i n f a i l e d 5 0
Carry out the update in an environment
that has little network load.
51
Line, etc., is busy when log-in into
DPMS when rmware such as Sub
CPU, DSP and PLD was rewritten.
S u b * * * m i n
S e r v e r i s b u s y 5 1
Carry out the update in an environment
that has little network load.
52
Connection to DPMS failed when
rmware such as Sub CPU, DSP
and PLD was rewritten.
S u b * * * m i n
C o n n e c t i o n F a i l 5 2
Check the network connection.
Carry out the update in an environment
that has little network load.
54
Error message received regarding
rmware data after the log-in to DPMS
when rmware such as Sub CPU, DSP
and PLD was rewritten.
S u b * * * m i n
U p d a t i n g f a i l 5 4
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
55
When rmware such as Sub CPU,
DSP and PLD, request was made for
rmware data after the log-in to DPMS,
but it timed out was rewritten.
S u b * * * m i n
U p d a t i n g f a i l 5 5
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
56
Downloading rmware failed after
the log-in to DPMS when rmware
such as Sub CPU, DSP and PLD
was rewritten.
S u b * * * m i n
D o w n l o a d f a i l 5 6
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
57
Firmware download error received (line
congestion) after the log-in to DPMS when
rewriting rmware such as Sub CPU, DSP
and PLD was rewritten.
S u b * * * m i n
S e r v e r i s b u s y 5 7
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
58
Firmware download error was received
(connection failure) after the log-in to
DPMS when rmware such as Sub CPU,
DSP and PLD was rewritten.
S u b * * * m i n
C o n n e c t i o n F a i l 5 8
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.

Denon AVR-3312 Specifications

General

Impedance	8 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Speaker selector	A+B
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.8 %
Power output per channel (1KHz@8 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
Audio (L/R) in	8
Composite video in	5
Ethernet LAN (RJ-45) ports	1
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Composite video out	3
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
Internet radio services supported	Last.fm, Napster
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Display	VFL
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPad, iPhone, iPod
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W
Card reader integrated	-
Cables included	AC

Weight and Dimensions

Depth	382 mm
Width	434 mm
Height	167 mm
Weight	11800 g