Denon AVR-4311 User Manual

105
Basic versionSimple version Information
ENGLISH
Advanced version
Operating the main remote control unit
n Default settings for preset codes
The devices shown below are registered for each input source
button as default. Settings can be changed according to the
devices to be used.
Input source
select button
Category Brand Preset code
Blu-ray Disc player DENON 32258
DVD player DENON 32134
Television SONY 10810
Satellite set top box DirecTV 01377
DVD recorder Tivo 20739
Cable set top box Motorola 01376
Digital camcorder
(DVD recorder)
Panasonic 21378
z
Control dock for iPod DENON 62516
CD player DENON 42867
z If a control dock for iPod is not to be used, the preset code for
another device can be set to
DOCK.
NOTE
The preset code cannot be registered to TUNER/DTU, NET/USB, iPod,
PHONO or SAT TU.
1
Press ZONE SELECT to switch the zone mode to
M
(MAIN ZONE).
The
M
indicator lights.
2
Press AMP to set the remote control unit to AMP-
operation mode.
3
Press MENU.
The menu is displayed on the TV screen.
4
Use ui to select “MANUAL
SETUP” – “Option Setup” –
“Remote Preset Codes” and then
press ENTER or p.
OPTION SETUP
Search preset codes to register in the remote
controller
Volume Control
Source Delete
GUI
Remote Preset Codes
Quick Select Name
Zone Rename
OPTION
OPTION
5
Pressing ui, select the device
category for preset registration.
Then press ENTER or p.
REMOTE PRESET CODES
Select the device category
Blu-ray
CD
CD Recorder
CABLE
CABLE/PVR
DVD
DVD Recorder
HD-DVD
IPTV STB
PVR
D
I
J
L
M
N
O
P
S
T
OPTION
• For “TV”, “TV/DVD” or “TV/VCR”
categories, only the preset code for TV
can be registered.
6
Pressing ui, select the  rst letter of the device
brand name. Then press ENTER or p.
REMOTE PRESET CODES
Select first letter of device brand
Blu-ray
CD
CD Recorder
CABLE
CABLE/PVR
DVD
DVD Recorder
HD-DVD
IPTV STB
PVR
1
A
B
C
D
E
F
G
H
I
OPTION
• The fi rst character is displayed as 1, A to Z. (Initials for the brand are
displayed for each category.)
For brand names that start with numbers and symbols, select “1”.
7
Pressing ui, select the device brand name. Then
press ENTER or p.
REMOTE PRESET CODES
[1/4]
Daenyx
Daewoo
Dalton
Dansai
Dantax
Datsun
Daytek
Dayton
DCE
-DVD-
Select the device brand
CH-
Previous
CH+
Next
OPTION
• When there are several pages of brand names, the pages can be
switched by pressing the remote control unit’s CH + or CH –.
NOTE
If the desired brand name is not listed, the supplied remote control
unit cannot control the device. Use the remote control unit supplied
with the device to be used.
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confi rm the setting Return to previous menu
1.AVR4311E2_ENG_6th_0810.indd 105 2010/08/12 10:12:19

Denon AVR-4311 Specifications

General

Type	AV Receiver
Number of channels	9.2
Output Power per Channel	140 W (8 ohms, 20 Hz - 20 kHz, 0.05% THD)
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Total Harmonic Distortion	0.05%
Input Sensitivity/Impedance	200 mV / 47 kohms
Signal-to-Noise Ratio	102 dB
HDMI outputs	2
3D Support	Yes
Network features	AirPlay, DLNA
Audio DAC	24-bit/192kHz
Video Inputs/Outputs	Component
Audio Inputs/Outputs	Analog, Optical, Coaxial
Network Connectivity	Ethernet
Supported Audio Formats	Dolby TrueHD, DTS-HD Master Audio, FLAC, WAV, MP3, WMA, AAC
Dimensions (W x H x D)	434 x 195 x 427 mm
HDMI inputs	7 (1 on front)