Denon AVR-4311 User Manual

124
ENGLISH
Surround
Surround mode (vpage46)
Subwoofer Att.
(vpage84)
Tone
z20
(vpage84)
Audyssey Settings (vpage85) A-DSX Soundstage (vpage86) Dolby Volume (vpage87)
RESTORER
z29
(vpage88)
MultEQ
®
XT 32
(vpage85)
Dynamic EQ
®
z21
(vpage85)
Dynamic
Volume
®
z22
(vpage86)
Audyssey DSX™
z25
(vpage86)
Stage Height
z26
(vpage86)
Stage Wide
z27
(vpage86)
Dolby Volume
(vpage87)
Volume Leveler
z28
(vpage87)
Volume Modeler
z28
(vpage87)
DIRECT/PURE DIRECT (2-channel)
z1
DIRECT/PURE DIRECT (Multi-channel)
z1
DSD DIRECT (2-channel)
DSD DIRECT (Multi-channel)
STEREO
S S S S S S S S
EXT.IN/PURE DIRECT EXT
z2
S
MULTI CH IN
S S S S S S S S
WIDE SCREEN
S S S S S S S S
DOLBY PRO LOGIC gz S S S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S
DOLBY PRO LOGIC
S S S S S S S S S
DOLBY PRO LOGIC gx A-DSX S S S S S S S S S S S
DOLBY PRO LOGIC g A-DSX S S S S S S S S S S S
DOLBY PRO LOGIC A-DSX
S S S S S S S S S S S
DTS NEO:6
S S S S S S S S S
DTS NEO:6 A-DSX
S S S S S S S S S S S
Audyssey DSX
S S S S S S S S S S
DOLBY DIGITAL
S S S S S S S S
DOLBY DIGITAL Plus
S S S S S S S S
DOLBY TrueHD
S S S S S S S S
DTS SURROUND
S S S S S S S S
DTS 96/24
S S S S S S S S
DTS-HD
S S S S S S S S
DTS Express
S S S S S S S S
MULTI CH STEREO
S S S S S S S S
SUPER STADIUM
D
z23
S S S S S S S
ROCK ARENA
D
z24
S S S S S S S
JAZZ CLUB
S S S S S S S S
CLASSIC CONCERT
S S S S S S S S
MONO MOVIE
S S S S S S S S
VIDEO GAME
S S S S S S S S
MATRIX
S S S S S S S S
VIRTUAL
S S S S S S S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z
2 During playback in PURE DIRECT EXT mode, the surround parameters are the same as in EXT.IN mode.
z20 This item cannot be set when “Dynamic EQ” (vpage85) is set to “ON” or “Dolby Volume” is set to
“ON”.
z21 This item cannot be set when “MultEQ XT 32” (vpage85) is set to “OFF” or “Manual”.
z22 This item cannot be set when “Dynamic EQ” (vpage85) is set to “OFF”.
z23 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z24 In this surround mode, bass is +6 dB, and treble is 0 dB. (Default)
z25 This item can not be selected when “Surround Parameters” – “PLgz Height” (vpage84) is set to “ON”.
z26 This item can be selected when “A-DSX Soundstage” – “Audyssey DSX” is set to “ON-Height-” or “ON-
Height/Wide”.
z27 This item can be selected when “A-DSX Soundstage” – “Audyssey DSX” is set to “ON-Wide-” or “ON-
Height/Wide”.
z28 This item cannot be selected when "Dolby Volume" is set to "OFF".
z29 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
1.AVR4311E2_ENG_6th_0810.indd 124 2010/08/12 10:12:25

Denon AVR-4311 Specifications

General

Type	AV Receiver
Number of channels	9.2
Output Power per Channel	140 W (8 ohms, 20 Hz - 20 kHz, 0.05% THD)
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Total Harmonic Distortion	0.05%
Input Sensitivity/Impedance	200 mV / 47 kohms
Signal-to-Noise Ratio	102 dB
HDMI outputs	2
3D Support	Yes
Network features	AirPlay, DLNA
Audio DAC	24-bit/192kHz
Video Inputs/Outputs	Component
Audio Inputs/Outputs	Analog, Optical, Coaxial
Network Connectivity	Ethernet
Supported Audio Formats	Dolby TrueHD, DTS-HD Master Audio, FLAC, WAV, MP3, WMA, AAC
Dimensions (W x H x D)	434 x 195 x 427 mm
HDMI inputs	7 (1 on front)