Denon AVR-4810 - Page 50


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettings
ENGLISH
Making Detailed Settings (Manual Setup)
Main remote control unit
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Setting items Setting contents
Network Connecting
(Continued)
t Use i to select “Connection” and press ENTER.
Network connection starts.
When connection is established with the access point, “Connection
completed.” is displayed.
Exit
NETWORK CONNECTING
Detail
Terminate setup
Connection completed.
DHCP
192.168.100.85IP Address
Enter
ON
AVR-4810 performs automatic network setup due to the DHCP
function.
When connecting to a network without a DHCP function, you will need
to manually configure the IP address.
For details, see page 48 “Wired LAN settings” in step 3.
How to connect with WPS (Push-button method)
Use access points (routers) equipped with WPS functions. See the
router user manual for details.
NETWORK CONNECTING
Set using the WPS function
Select a connection method appropriate for your
RETURN
CancelEnter
wireless LAN host
WPS
Search
Manual
NETWORK CONNECTING
Connect to network with the push-button method
Select whether to connect with the push-button or
RETURN
CancelEnter
PIN code method
Push Button
PIN Code
q Select “WPS” and press ENTER.
w Select “Push Button” and press ENTER.
n
Setting items Setting contents
Network Connecting
(Continued)
e Press WPS for the target access point.
r Select “Connection” and press ENTER.
When connection is established with access point, “Connection
completed” is displayed.
NETWORK CONNECTING
Start connection
Select “Connection” after pressing the access point
RETURN
CancelEnter
WPS button
Connection
This WPS (push-button) setup screen can be displayed directly
by pressing and holding o and p on the main unit for at least 3
seconds.
How to connect with WPS (PIN code method)
Use access points (routers) equipped with WPS functions. See the
router user manual for details.
NETWORK CONNECTING
Set using the WPS function
Select a connection method appropriate for your
RETURN
CancelEnter
wireless LAN host
WPS
Search
Manual
NETWORK CONNECTING
Connect to network with the PIN code method
Select whether to connect with the push-button or
RETURN
CancelEnter
PIN code method
Push Button
PIN Code
q Select “WPS” and press ENTER.
w Select “PIN Code” and press ENTER.
n
q
w
r
q
w