Denon AVR-E400 User Manual

113
Setting items Setting details
DIGITAL
Set this to change the digital
audio input connectors
assigned to the input
sources.
CBL/SAT DVD
Blu-ray GAME
AUX MEDIA PLAYER
CD TV AUDIO
COAX (Coaxial) / OPT (Optical) : Assign a digital input connector to the
selected input source.
– : Do not assign a digital input connector to the selected input source.
•At time of purchase, the settings of the dierent input sources are as
shown below.
Input
source
CBL/SAT
DVD Blu-ray GAME
Default
setting
COAX – – –
Input
source
AUX
MEDIA
PLAYER
CD TV AUDIO
Default
setting
– – – OPT
ANALOG
Set this to change the
analog audio input
connectors assigned to the
input sources.
CBL/SAT DVD
Blu-ray GAME
AUX MEDIA PLAYER
CD TV AUDIO
1 / 2 / 3 / 4 : Assign a analog input connector to the selected input source.
– : Do not assign a analog input connector to the selected input source.
•At time of purchase, the settings of the dierent input sources are as
shown below.
Input
source
CBL/SAT
DVD Blu-ray GAME
Default
setting
1 2 3 –
Input
source
AUX
MEDIA
PLAYER
CD TV AUDIO
Default
setting
– – 4 –
Inputs
Setting items Setting details
COMP
(Component video)
Set this to change the
component video input
connectors assigned to the
input sources.
CBL/SAT DVD
Blu-ray GAME
AUX MEDIA PLAYER
CD TV AUDIO
COMP : Assign the component video input connector to the selected
input source.
– : Do not assign a component video input connector to the selected input
source.
•At time of purchase, the settings of the dierent input sources are as
shown below.
Input
source
CBL/SAT
DVD Blu-ray GAME
Default
setting
COMP – – –
Input
source
AUX
MEDIA
PLAYER
CD TV AUDIO
Default
setting
– – – –
VIDEO
Set this to change the
composite video input
connectors assigned to the
input sources.
CBL/SAT DVD
Blu-ray GAME
AUX MEDIA PLAYER
CD TV AUDIO
1 / 2 : Assign the video input connector to the selected input source.
– : Do not assign a video input connector to the selected input source.
•At time of purchase, the settings of the dierent input sources are as
shown below.
Input
source
CBL/SAT
DVD Blu-ray GAME
Default
setting
1 2 – –
Input
source
AUX
MEDIA
PLAYER
CD TV AUDIO
Default
setting
– – – –
Set Defaults
The “Input Assign” settings
are returned to the default
settings.
Reset : Reset to the defaults.
Cancel : Do not reset to the defaults.
If you select “Set Defaults” and press ENTER,
the message “Reset all input assignments
to the factory default?” is displayed. Select
“Reset” or “Cancel”, and then press ENTER.
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD

Denon AVR-E400 Specifications

General

HDMI Inputs	6
HDMI Outputs	1
3D Pass-through	Yes
4K Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Audyssey MultEQ	Yes
Network Connectivity	Yes
AirPlay	Yes
DLNA	Yes
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Response Bandwidth	10 Hz - 100 kHz
THD	0.08%
Tuner Presets	56
Tuner Bands	AM/FM
Frequency Response	10 Hz - 100 kHz
Video Upscaling	Yes
Bluetooth	No
Wi-Fi	No
Surround Sound Effects	DTS Neo:6
Audio D/A Converter	192kHz/24-bit
Inputs	HDMI, Digital Optical, Digital Coaxial, Analog
Outputs	HDMI, Headphones