EasyManuals Logo

Denon AVR-E400 User Manual

Denon AVR-E400
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
18
Connecting an FM/AM antenna
•Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts.
•After connecting the antenna and receiving a broadcast signal (vpage 36 “Listening to FM/AM
broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal.
n AM loop antenna assembly
1
Put the stand section through the bottom of the
loop antenna from the rear and bend it forward.
Stand
Square
hole
Projecting
part
Loop
antenna
2
Insert the projecting part into the square hole in
the stand.
n Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Standing alone
Use the procedure shown above to assemble.
Nail, tack, etc.
NOTE
•Do not connect two FM antennas simultaneously.
•Even if an external AM antenna is used, do not disconnect the AM loop antenna.
•Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.
•If the signal has noise interference, connect the ground terminal (GND) to reduce noise.
•If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For
details, inquire at the retail store where you purchased the unit.
Connecting other devices
w eq
FM outdoor
antenna
Direction of broadcasting station
75 Ω/ohms
coaxial cable
FM indoor antenna
(supplied)
AM outdoor
antenna
Ground
AM loop antenna
(supplied)
Black
White
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Table of Contents

Other manuals for Denon AVR-E400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-E400 and is the answer not in the manual?

Denon AVR-E400 Specifications

General IconGeneral
HDMI Inputs6
HDMI Outputs1
3D Pass-throughYes
4K Pass-throughYes
Dolby TrueHDYes
DTS-HD Master AudioYes
Audyssey MultEQYes
Network ConnectivityYes
AirPlayYes
DLNAYes
Input Impedance47 kOhms
Input Sensitivity200 mV
Signal-To-Noise Ratio100 dB
Response Bandwidth10 Hz - 100 kHz
THD0.08%
Tuner Presets56
Tuner BandsAM/FM
Frequency Response10 Hz - 100 kHz
Video UpscalingYes
BluetoothNo
Wi-FiNo
Surround Sound EffectsDTS Neo:6
Audio D/A Converter192kHz/24-bit
InputsHDMI, Digital Optical, Digital Coaxial, Analog
OutputsHDMI, Headphones

Related product manuals