Denon AVR-E400 User Manual

41
Listening to FM/AM broadcasts
n Tuning in to radio stations and presetting them
automatically (Auto Preset Memory)
Up to 56 stations can be preset.
If “Auto Preset Memory” is performed after performing “Preset
Memory”, the “Preset Memory” settings will be overwritten.
1
Press TUNER to switch the input source to “TUNER”.
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “Auto Preset Memory”, then press
ENTER.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
TUNER
FM 92.10MHz
Now Playing
Tune Preset Option
Option
FM/AM
Direct Tune
Preset Memory
Tune Mode
Auto Preset Memory
Preset Name
Preset Skip
Video Select
GDisplay of this unitH
Auto Preset
4
Press ENTER.
The unit starts to tune in to radio stations automatically and
preset them.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
TUNER
FM 92.10MHz
Now Playing
Tune Preset Option
Start
Auto Preset Memory
GDisplay of this unitH
AutoPreset:Start
•When presetting is completed, “Completed” is displayed for about
5 seconds and the option menu screen turns o.
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Denon AVR-E400 Specifications

General

HDMI Inputs	6
HDMI Outputs	1
3D Pass-through	Yes
4K Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Audyssey MultEQ	Yes
Network Connectivity	Yes
AirPlay	Yes
DLNA	Yes
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Response Bandwidth	10 Hz - 100 kHz
THD	0.08%
Tuner Presets	56
Tuner Bands	AM/FM
Frequency Response	10 Hz - 100 kHz
Video Upscaling	Yes
Bluetooth	No
Wi-Fi	No
Surround Sound Effects	DTS Neo:6
Audio D/A Converter	192kHz/24-bit
Inputs	HDMI, Digital Optical, Digital Coaxial, Analog
Outputs	HDMI, Headphones