EasyManuals Logo

Denon AVR-X2100W Service Manual

Denon AVR-X2100W
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
1.5. Version Display in the Setup Menu
Follow the steps below to display the rmware information.
(1) Press the "
SETUP
" button on the remote control.
(2) Select "
General - Information - Firmware
".
The version information is displayed as a 12-digit number as shown in the screenshot below.
This 12-digit number comprises part of the version number of each device and module.
These version numbers correspond to the 12-digit number as shown below.
b
The rmware version numbers and this 12-digit version information are written in the Service Information.
General/Firmware
Version
XXXX - XXXX - XXXX
GUI Image
Main
Sub
0 0 3 8
Info display
1 2 0 0 - 8 3 8 2 - 6 7 7 3
DSP 8 4 0 2
A.PLD
V.PLD
2 8 0 1
3 4 0 7
GUI 6 8 1 0 0 0 1 6
6 8 1 0 0 0 2 8
E.FBL 0 9 0 3 1 1
E.SBL B 2 0 1 4 0 1 2 8 0 6 3 2
E.IMG I 2 0 1 4 0 4 1 7 0 0 3 7
The 1st digit from the right for DSP
The 1st digit from the right for A.PLD
The 1st digit from the right for IMG
The 2nd digit from the right for IMG
The 1st digit from the right for GUI
The 1st digit from the right for V.PLD
The 2nd digit from the right for Main
The 1th digit from the right for Main
The 2nd digit from the right for Sub
The 1st digit from the right for Sub
24

Table of Contents

Other manuals for Denon AVR-X2100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2100W and is the answer not in the manual?

Denon AVR-X2100W Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)150 W
Power output per channel (20-20KHz@8 Ohm)95 W
HDMI in8
Composite video in2
Component video (YPbPr/YCbCr) in1
Speakers connectivity type-
Ethernet LANYes
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Optical drive includedNo
Product colorBlack
Audio decodersDolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height167 mm
Weight9700 g

Related product manuals