Denon AVR-X2100W Service Manual

Sound mode (v p. 115)
Surround Parameter (
v
p. 146)
Tone Control
z
7
(v
p. 111)
Audyssey (v p. 152)
Restorer
z
10
(v
p. 150)
Pro Logicg/gx Music mode only
Neo: 6
Music
modes only
Panorama
(v p. 147)
Dimension
(v p. 148)
Center
Width
(v p. 148)
Center
Image
(v p.
147)
MultEQ
®
XT
z
8 (v p. 152)
Dynamic EQ
z
9
(v p. 153)
Dynamic
Volume
z
9 (v p. 154)
Direct/Pure Direct (2-channel)
z
5
Direct/Pure Direct (Multi-channel)
z
5
Stereo
S S S S
Multi Ch In
S S S S
Dolby Pro Logic gz S S S S S
Dolby Pro Logic gx S S S S S S S S
Dolby Pro Logic g S S S S S S S S
DTS Neo:6
S S S S S S
Dolby Digital
S S S S
Dolby Digital Plus
S S S S
Dolby TrueHD
S S S S
DTS Surround
S S S S
DTS 96/24
S S S S
DTS-HD
S S S S
DTS Express
S S S S
Multi Ch Stereo
S S S S S
Rock Arena
S
z
11
S S S S
Jazz Club
S S S S S
Mono Movie
S S S S S
Video Game
S S S S S
Matrix
S S S S S
Virtual
S S S S S
z
5,
z
7 -
z
11: “Sound modes and surround parameters” (v p. 240)
Contents Connections Playback Settings Tips Appendix
239
Front panel Display Rear panel Remote Index
z1
This item can be selected when a Dolby TrueHD signal is played.
z2
This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
z3
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This setting is available when the set sound mode name contains “+PLgz”.
z5
During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z6 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 188)
z7 This item cannot be set when “Dynamic EQ” is set to “On”. (v
p. 153)
z8
This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z9
This item cannot be set when “MultEQ
®
XT” is set to “Off”. (v p. 152)
z10
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z11
In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
Contents Connections Playback Settings Tips Appendix
240
Front panel Display Rear panel Remote Index
78

Denon AVR-X2100W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	8
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Speakers connectivity type	-
Ethernet LAN	Yes
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	167 mm
Weight	9700 g