Name: Denon AVR-X2200W
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

FIRMWARE UPDATE PROCEDURE

1. Updating via USB

The latest rmware can be downloaded to a USB memory for updates.

1.1. Connecting to the USB Memory

(1) Preparation

• Use a memory that supports USB2.0.

• USB format : Prepare a USB memory formatted in FAT16 or FAT32.

• Do not run the USB memory through a hub.

• Do not connect a computer to the USB port of this unit using a USB cable.

• Do not use an extension cable when connecting the USB unit.

• If a USB memory device cannot be updated, replace it with a different USB memory device and perform the update

again.

1.2. Unzipping the Downloaded File

Unzip the downloaded le on your computer.

AVR-XXXXXXX USB_AVR-XXXXXXX_XXXXXXXXXXXX-XXXX.zip

The "

rmwares

" folder is created upon unzipping the le.

Copy that folder to USB ash drive.

The "

rmwares

" folder must be in the root directly of the USB ash drive (memory).

copy to USB flash drive

Other manuals for Denon AVR-X2200W

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X2200W and is the answer not in the manual?

General