Denon AVR-X4100W

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center
channel.
174
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 174
Surround Parameter Adjusts surround sound parameters.
175
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
181
Audio Delay Compensates for incorrect timing between video and audio. 182
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 182
Audyssey
Set Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic Volume
®
,
Audyssey LFC
TM
and Audyssey DSX
®
.
183
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 187
.
Video
Picture Adjust Adjusts picture quality. 189
HDMI Setup Makes settings for HDMI video/audio output. 191
Output Settings Makes settings for video output. 196
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 199
On Screen Display Configures the on-screen display settings.
200
TV Format Sets the video signal format to be output for the TV you are using. 201
Contents Connections Playback Settings Tips Appendix
Settings
168
Front panel Display Rear panel Remote Index