Denon AVR-X4100W Owner's Manual

o
Dolby Atmos
This speaker configuration is optimized for Dolby Atmos playback.
n
9.1-channel system
This system configuration plays back 9.1-channels by using an external power amplifier.
.
C
FL FR
SW
TRR
TRL
TFR
TFL
SL SR
.
CENTER SURROUND SURROUNDFRONTFRONT
HEIGHT1 HEIGHT1
SURROUND BACKSURROUND BACK
TFR TFL
TRR
Power amplifier
TRL
SW
FR FL C SR SL
Contents Connections Playback Settings Tips Appendix
54
Front panel Display Rear panel Remote Index

Denon AVR-X4100W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out connectivity	Yes
Audio output channels	- channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
3D	-
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	12600 g