EasyManuals Logo

Denon AVR-X4100W Owner's Manual

Denon AVR-X4100W
346 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Connecting speakers
Install speakers and connect them to this unit. (v p. 30, 40)
Speaker installation
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
.
C
FL FR
SBL
SBR
SB
SW1
SW2
FWL
FWR
SL SR
FL/FR (Front
speaker left/right):
Place the FRONT left and right speakers an equal
distance from the main listening position. The distance
between each speaker and your TV should also be the
same.
C (Center
speaker):
Place the CENTER speaker in between the front
speakers and above or below your TV.
SL/SR (Surround
speaker left/right):
Place the SURROUND left and right speakers an
equal distance to the left and right sides of the main
listening position. If you don’t have surround back
speakers, move the surround speakers slightly behind
your listening position.
SBL/SBR(Surround back
speaker left/right):
Place the SURROUND BACK left and right speakers
an equal distance from the main listening position and
directly behind the main listening position. When using
a single surround back speaker (SB), place it directly
behind the listening position.
FWL/FWR
(Front wide speakers left/
right):
Place the FRONT WIDE left and right speakers
outside of the front left and right speakers so that there
is an equal distance between all front speakers.
SW 1/2 (Subwoofer) :
Place the SUBWOOFER at a convenient location near
the front speakers. If you have two subwoofers, place
them asymmetrically across the front of your room.
Contents Connections Playback Settings Tips Appendix
30
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X4100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4100W and is the answer not in the manual?

Denon AVR-X4100W Specifications

General IconGeneral
Receiver typeSurround
Frequency range20 - 20000 Hz
Pre-out connectivityYes
Audio output channels- channels
Total Harmonic Distortion (THD)0.08 %
Power output per channel (20-20KHz@8 Ohm)125 W
HDMI in8
Composite video in4
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in2
Number of HDMI outputs3
Speakers connectivity typeRCA
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supportedJPG
Supported radio bandsAM, FM
Internet radio services supportedSpotify, vTuner
Optical drive includedNo
3D-
Product colorBlack
Audio decodersDolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)0.1 W
Power consumption (typical)670 W
Weight and Dimensions IconWeight and Dimensions
Depth389 mm
Width434 mm
Height167 mm
Weight12600 g

Related product manuals