Denon AVR-X4100W

Front Speaker
Set the front speaker A/B to use for every sound mode.
A
(Default):
Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
0
This can be set when “Assign Mode”
(v
p. 217) is set to “5.1ch + Front B”.
2ch Playback
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
o
Setting
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
Auto
(Default):
The settings in “Speakers” are applied. (v p. 206)
Manual:
Set the speakers for 2-channel playback. Make the
following settings:
o
Front
Set the size of the front speakers for 2-channel playback.
Large
(Default):
Use a large speaker that can adequately play back
very low bass frequencies.
Small:
Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
When “Speaker Config.”-“Subwoofer” in the menu is set to “None”, “Large” is
automatically set.
(v
p. 226)
Contents Connections Playback Settings Tips Appendix
235
Front panel Display Rear panel Remote Index