Denon AVR-X4100W

z1
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z2
The applicable sound mode includes “DTS Neo:X” and sound modes that have “+Neo:X” in the sound mode name.
z3
A signal for each channel contained in an input signal is output as audio.
z4
Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v
p. 227)
z5 Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. (v p. 180)
z6
Audio is output from the speakers specified in the “Audyssey DSX
®
” settings. (v
p. 186)
z7
Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 234)
Upgrade (Auro-3D)
.
Sound mode
Channel output
Front
L/R
Center
Surround
L/R
Surround
Back
L/R
Front
Wide L/R
Front
Height
L/R
Top Front
L/R
Top
Middle
L/R
Top
Rear
L/R
Rear
Height
L/R
Surround
Height
L/R
Front
Dolby
Atmos
Enabled
L/R
Surround
Dolby
Atmos
Enabled
L/R
Back
Dolby
Atmos
Enabled
L/R
Subwoofer
Auro-3D
SDD D D D
Auro-2D Surround
SDDD D
Contents Connections Playback Settings Tips Appendix
294
Front panel Display Rear panel Remote Index