Selecting an audio program
1
Select the tuning mode (“HD-Auto”, “Auto” or
“Manual”).
2
Press TUNE + or TUNE – to tune in the desired
Multicast channel.
0
If the station you are tuning in has multiple audio programs,
“HD1”is indicated on the display.
If it only has one audio program, “HD” is indicated.
0
When the unit receives multicast channels, the multicast program
number (HD2) is displayed to the right of the station name.
0
This function is not available for AM HD Radio stations because they cannot
broadcast multicast channels.
0
If digital audio data cannot be received after the station is selected, or if the station
signal is weak, the unit may not be able to receive the multicast channels.
0
If the station signal is weak, the digital audio of the multicast channel may cut out.
Tuning in to stations and presetting
them automatically (Auto Preset
Memory)
A maximum of 56 radio stations can be automatically preset.
1
Press OPTION when the input source is “HD Radio”.
The option menu screen is displayed.
2
Use ui
to select “Auto Preset Memory”, then press
ENTER.
3
Press ENTER.
The unit starts to tune in to radio stations automatically and preset
them.
0
When presetting is completed, “Completed” is displayed for about
5 seconds and the option menu screen turns off.
The preset memory is overwritten.
Contents Connections Playback Settings Tips Appendix
102
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
