Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 182
Surround Parameter Adjusts surround sound parameters. 182
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
188
Audio Delay Compensates for incorrect timing between video and audio. 189
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 189
Audyssey
Set Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic Volume
®
,
Audyssey LFC
TM
and Audyssey DSX
®
.
190
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 194
.
Video
Picture Adjust Adjusts picture quality. 196
HDMI Setup Makes settings for HDMI video/audio output. 198
Output Settings Makes settings for video output. 202
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 206
On Screen Display Configures the on-screen display settings. 207
TV Format Sets the video signal format to be output for the TV you are using. 208
Contents Connections Playback Settings Tips Appendix
Settings
176
Front panel Display Rear panel Remote Index