Source Rename
Change the display name for input source.
This is convenient when the name of your device and the input source
name of this unit are different. You can change the name to suit your
needs. When the renaming is completed, the name is displayed on this
unit’s display and on the menu screen.
CBL/SAT / DVD / Blu-ray / Game /
AUX1 / AUX2 / Media Player / CD /
TV Audio / Phono:
Change the display name for input
source.
Set Defaults:
The Source Rename settings are
returned to the default settings.
Up to 12 characters can be input. For character input, see “Using the keyboard
screen” (v p. 181).
Hide Sources
Remove from the display input sources that are not used.
Show
(Default):
Use this source.
Hide: Do not use this source.
Source Level
This function corrects the playback level of the selected input source’s
audio input.
Make this setting if there are differences in the input volume levels
between the different sources.
o
Source Level
n
When the input source is set to “iPod/USB”,
“Online Music”, “Bluetooth” or “HD Radio”
-12 dB – +12 dB (Default : 0 dB)
o
Analog Inputs / Digital Inputs
n
When the input source is set other than to “iPod/
USB”, “Online Music”, “Bluetooth” or “HD Radio”
-12dB – +12dB (Default : 0dB)
0
The analog input level can be adjusted independently for input sources for which
“ANALOG” is assigned at “Input Assign”. (v p. 209)
0
The digital input level can be adjusted independently for input sources for which
“DIGITAL” is assigned at “Input Assign”. (v p. 209)
0
“Source Level” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix
211
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
