EasyManuals Logo
Home>Denon>Receiver>AVR-X5200W

Denon AVR-X5200W User Manual

Denon AVR-X5200W
362 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #287 background imageLoading...
Page #287 background image
o
Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
0
The network communication speed is slow or the radio station is busy.
When making a call on
iPhone, noise occurs in
audio output on this unit.
0
When making a call, keep a distance of 0.7 ft/20 cm or longer between iPhone and this unit.
Noise often occurs in
FM/AM broadcasting.
0
Change the antenna orientation or position.
74
0
Separate the AM loop antenna from the unit.
0
Use an FM outdoor antenna. 74
0
Separate the antenna from other connection cables.
74
The sounds appear to be
distorted.
0
Lower the volume. 83
0
Set “Off” to the ECO Mode. When “On” or “Auto” is in the ECO Mode, the audio may by distorted when
the playback volume is high.
260
Sound cuts out when using
Wi-Fi connection.
0
If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
connection.
76
0
Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
254
Contents Connections Playback Settings Tips Appendix
287
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X5200W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X5200W and is the answer not in the manual?

Denon AVR-X5200W Specifications

General IconGeneral
Receiver typeSurround
Frequency range20 - 20000 Hz
Output impedance16 Ω
Speaker selectorA+B
Pre-out connectivityYes
Audio output channels- channels
Power output per channel (1KHz@6 Ohm)205 W
Power output per channel (20-20KHz@8 Ohm)140 W
HDMI in8
Remote (IR) input1
Composite video in5
Component video (YPbPr/YCbCr) in2
Number of HDMI outputs3
Connectivity technologyWired & Wireless
Speakers connectivity type-
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supportedJPG
Supported radio bandsAM, FM
Internet radio services supportedSpotify, vTuner
Optical drive includedNo
Product colorSilver
Audio decodersDolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)730 W
Weight and Dimensions IconWeight and Dimensions
Depth393 mm
Width434 mm
Height167 mm
Weight14200 g

Related product manuals