Denon AVR-X5200W User Manual

Checking the HD Radio reception
information
1
Press STATUS on the main unit while an HD Radio
broadcast is being received.
The current reception information is shown on the display.
.
1. Normal
$
2. Frequency / Signal strength
$
3. Long Station name / Program and Program type
$
4. Title name / Artist name
$
5. Album name / Genre name
If the station signal weakens while receiving a digital broadcast (while “HD” and text
is displayed), the mode automatically switches to the analog reception mode (the
reception frequency is displayed).
Because of this, the “HD” and text may flicker if the station signal level is weak and
unstable.
Contents Connections Playback Settings Tips Appendix
107
Front panel Display Rear panel Remote Index

Denon AVR-X5200W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Pre-out connectivity	Yes
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	205 W
Power output per channel (20-20KHz@8 Ohm)	140 W
HDMI in	8
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired & Wireless
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
Product color	Silver
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	730 W

Weight and Dimensions

Depth	393 mm
Width	434 mm
Height	167 mm
Weight	14200 g