Denon AVR-X5200W User Manual

o
Speaker Select
Makes settings for the speakers outputting sound.
n
When the sound mode is “DTS Neo:X”
Surround Back: Sound is output from the surround back speakers.
Height: Sound is output from the front height speakers.
Wide: Sound is output from the front wide speakers.
Back/Height:
Sound is output from the surround back and front
height speakers.
Back/Wide:
Sound is output from the surround back and front
wide speakers.
Height/Wide:
Sound is output from the front height and front wide
speakers.
This can be selected when using any of the surround back, front wide or front
height speakers.
n
When the sound mode is the original sound mode
Floor
(Default):
Plays back without height speakers.
Floor & Height: Plays back with height speakers.
Front:
Plays back only with speakers in front of the
surround speaker.
o
Set Defaults
The “Surround Parameter” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix
187
Front panel Display Rear panel Remote Index

Denon AVR-X5200W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Pre-out connectivity	Yes
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	205 W
Power output per channel (20-20KHz@8 Ohm)	140 W
HDMI in	8
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired & Wireless
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
Product color	Silver
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	730 W

Weight and Dimensions

Depth	393 mm
Width	434 mm
Height	167 mm
Weight	14200 g