9.1ch/
2ch
Front:
0
Setting to assign the power amplifiers in this unit for
connecting 2-channel playback speakers to 2 channels.
0
You can switch the front speakers when using 2-channel
playback in direct mode or stereo mode, or when using
multi-channel surround playback.
(v p. 236)
When setting speakers for 2-channel playback, also
perform the “2ch Playback” setting. (v
p. 250)
7.1ch/
2ch
Front
(Bi-
Amp):
0
Setting to assign the power amplifiers in this unit for the
bi-amp connection of the 2-channel playback speakers
to 4 channels.
0
You can switch the front speakers when using 2-channel
playback in direct mode or stereo mode, or when using
multi-channel surround playback.
When setting speakers for 2-channel playback, also
perform the “2ch Playback” setting.
(v
p. 250)
7.1ch +
Front B:
0
Setting to assign the power amplifiers within this unit
for connecting the second set of front speakers.
0
You can switch between the desired combination of
front speakers A and front speakers B.
(v p. 237)
Switch the front speaker using the “Front Speaker”
setting. (v
p. 250)
Dolby
Atmos :
0
Setting to assign the power amplifiers within this unit
for the speaker layout suitable for Dolby Atmos
playback. (v p. 239)
Upgrade (Auro-3D)
Auro-3D:
0
Setting to assign the power amplifiers with this unit
for the speaker layout suitable for Auro-3D playback.
(v p. 240)
Contents Connections Playback Settings Tips Appendix
226
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
