Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2 / ZONE3
Set Defaults: The default setting is restored for the edited zone name.
Up to 10 characters can be input.
For character input, see
“Using the keyboard screen” (v
p. 181).
Quick Select Names
Change the quick select name that appears on the TV screen to one you
prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
Set Defaults:
The default setting is restored for the edited quick select
name.
Up to 16 characters can be input.
For character input, see
“Using the keyboard screen” (v
p. 181).
Trigger Out 1 / Trigger Out 2
Select the conditions for activating trigger out.
For details about how to connect the TRIGGER OUT jacks, see
“TRIGGER OUT jacks” (v
p. 79).
n
When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
“On”.
n
When setting for input source
Activates trigger out when the input source set to “On” is selected.
n
When setting for HDMI monitor
Activates trigger out when the HDMI monitor set to “On” is selected.
On: Activate trigger on this mode.
– – –: Do not activate trigger on this mode.
Contents Connections Playback Settings Tips Appendix
264
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
