10
Before use
Part names and
functions
Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Basic
operations
Basic operation
Turning the power on
Press POWER.
DECK CHG. lights, and the power switches on.
Turning the power off
Press POWER.
DECK CHG. goes out, and the power switches off.
NOTE
There is no function on this device for automatically switching off the
power supply when the unit is not used for a prolonged period.
If you do not intend to use this device for a prolonged period, for
safety either switch off the power supply, or remove the AC adaptor
plug from the wall socket.
Adjusting the volume of the master level
Turn MASTER LEVEL.
Basic operation
Microphone input
Adjusting the microphone input level
Turn MIC LEVEL.
n Enabling the ducking function
The ducking function detects the microphone input and attenuates
the audio signal level of the master output. This prevents
microphone audio from being inaudible under loud music.
Press DUCKING.
DUCKING lights up.
Headphone monitor
Make sure that your headphone plug is already inserted in the
Headphone jack.
1
Press CUE for each channel to select the source to
monitor.
The selected CUE lights up.
2
Turn MONITOR PAN to adjust the balance of the
cue volume and master volume.
3
Turn PHONES to adjust the headphone volume.
NOTE
When using headphones, be careful not to turn the volume too high.
This section describes operations of the unit without using the DJ software.
•For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
•For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
•TRAKTOR LE 2/PRO 2······Page 19 – 23
•Virtual DJ LE/PRO······Page 24 – 28
POWER
MIC LEVEL
DUCKING
MASTER LEVEL
PHONESDECK CHG.
MONITOR PAN
CUECUE
Top panel
Front panel
Rear panel
Headphone jack
To Next Page
Loading...
Need help?
General
