Denon MC3000 - Specifications

31
Before use
Part names and
functions
Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Specifications
n Audio
(0dBu=0.775Vrms,0dBV=1Vrms)
•LINE inputs 2 Stereo
Unbalanced RCA terminal
Input impedance: 51 kΩ
Level: 0dBV
Signal to Noise ratio: Over 87 dB
•Microphone inputs 1 Monaural
Microphone : Balanced1/4in.TRSterminal
(Tip: hot, Ring: cold, Sleeve: ground)
Input impedance: 10 kΩ
Level: –52 – –20 dBu (Unity = –40 dBu)
•USB AUDIO inputs 2Stereo(4Monaural)16bit,Fs:48kHzUSBB
•MASTER output
Balanced: Stereo,balanced1/4in.TRSterminal
(Tip: hot, Ring: cold, Sleeve: ground)
Load impedance: Over 600 Ω
Level: +4 dBu (Max +24 dBu)
•When RL = 10 kΩ
Frequency response: 20Hz–20kHz(±0.5dB)
THD: Less than 0.05 %
Crosstalk: Lessthan–85dB(1kHz)
Unbalanced: Stereo RCA terminal
Load impedance: 10 kΩ
Level: 0 dBu (Max +20 dBu)
•Headphone output Stereo1/4in.(1mm)
Load impedance: 40 Ω
Level: Over 100 mW
•USB AUDIO output 2Stereo(4Monaural)16bit,FS:48kHzUSBB
n General
USB MIDI input/output: IN: 1ch, OUT: 1ch MIDI 1.0, USB B
MASTER meter: PPM 7 Point LED –20 – +10 dB, Peak
CH fader: 11/4in.(45mm)slimtypefader
Cross fader: 11/4in.(45mm)fader
•Power voltage: DC12V(theunit)
AC adapter input:
U.S.A. and Canada models: AC120V,60Hz
European,U.K. and Asia/
Pacific models:
AC230V,50Hz
AC adapter output: DC12V2A
Power consumption: 16 W
Operating temperature: +5 °C – +35 °C
Operating humidity: 25 % – 85 %
Storage temperature: –20 °C – 60 °C
Specifications
z For the purpose of improvement, the specifications and design are subject to change without notice.