Denon MC3000 User Manual

12
Before use
Part names and
functions
Connections
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
USB settings
Basic
operations
VINYL
MODE
VINYL
MODE
SHIFTSHIFT
Jog wheel
Jog wheel
Top panel
Jog wheel lock function
Some DJ’s prefer not to play using the jog wheel. This function can
also be used to prevent accidental operation of the jog wheel while
the DJ is playing.
In this case, use the following steps to lock the jog wheel. During
playback, the touch sensor and rotation operation are disabled.
•Even if the jog wheel is locked using this function, the touch sensor
and rotation operation are enabled when there is nothing being
played back. Therefore, the jog wheel can be used for searching
when tracks are not being played back.
Locking the jog wheel
Hold down SHIFT for DECK A or B, and press VINYL
MODE
for the jog wheel that you want to lock.
VINYL MODE flashes, and the jog wheel is locked.
Cancelling the jog wheel lock
When the jog wheel is locked, hold down SHIFT for
DECK A or B, and press VINYL MODE for the jog wheel
that you want to release.
The jog wheel lock is released, and the jog wheel returns to the
previousstate(eitherVINYLmodeorBENDmode).
USB settings
USB AUDIO Input/Output
This device is equipped with a sound card function that enables a
maximum of 4 channels (stereo, 2 input 2 output) of USB AUDIO input
and output.
Theaudiosignalsfromlines1/2areoutputtoacomputer.
Further, the DJ software mixer output is output from the master
output terminal or headphone terminal of this device.
•USB 1/2 channel input DJ software master
•USB 3/4 channel input DJ software cue monitor
•USB 1/2 channel output MC3000 line 1 audio signal
•USB 3/4 channel output MC3000 line 2 audio signal

Denon MC3000 Specifications

General

Channels	2
Jog Wheels	2
MIDI Controller	Yes
Software	Serato DJ Intro
USB Audio Interface	Yes
Outputs	RCA
Inputs	2 stereo RCA line inputs