Denon MC3000 User Manual

20
Before use Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Part names and
functions
ON: Uses the sampler.
(This function is enabled when the upgraded
version TRAKTOR PRO 2 (sold separately) is
used.)
EFX.1/EFX.2/EFX.3/EFX.4:
Plays back the sample.
•Hold down e SAMP. and press this button to
playback the sample slot trigger.
•Hold down u SHIFT and press this button to
switchthesampleslotlterON/OFF.
•Press and hold e SAMP. and u SHIFT
together and press this button to switch one
shotorloopplaybackON/OFF.
•Hold down W5 SEL. and press this button to
load the file selected in the browser to the
sample slot.
•Hold down W7 RECORD and press this button
to copy the audio recorded in the lop recorder
to the sample slot.
•Hold down W9 SAMPLE and press this button
to load the loop from DECK A (B) to the sample
slot.
e Sample mode switching button (SAMP.)
OFF: Switches to the effect mode. qw EFX.
1 – 4
are used to operate the effects.
ON: Switches to the sample deck mode. qw
EFX. 1 – 4
are used to operate the sample deck.
r Loop point setting button
(LOOP IN/LOOP OUT)
Sets the loop in point and loop out point.
t Auto loop and loop size adjustment buttons
(AUTO LOOP –/+)
•AUTO LOOPswitchesautoloopON/OFF.
•Use –/+toadjusttheloopsize.
•Hold down u SHIFT and press this button to
move the loop position left or right.
y Hot cue button (CUE1/CUE2/CUE3/CUE4)
The operations differ as follows depending on
whether deck A (B) or C (D) are selected using
o DECK CHG.
When DECK A is selected: Up to 8 cue points
can be set. i CUE 5 – 8 turnON/OFFtoselect
the registered cue point. (This function is
enabled when the upgraded version TRAKTOR
PRO 2 (sold separately) is used.)
•ON: Sets CUE 1 – 4 points or cue playback.
•OFF: Sets CUE 5 – 8 points or cue playback.
•Hold down u SHIFT and press this button to
delete each of the cue point settings.
When DECK C is selected: Uses the sampler.
The following operations differ depending on
whether i CUE 5 – 8 are ON or OFF.
(This function is enabled when the upgraded
version TRAKTOR PRO 2 (sold separately) is
used.)
•ON: Hold down u SHIFT and press this
button to clear the sample slot.
•OFF: Switches mute for the sample slot ON
or OFF.
•Hold down u SHIFT and press this button to
clear the sample slot.
Top panel
Q3 Q6 Q9Q4 Q5 Q7
E4
E0
E3
E1
E2
W9
Q8
W7
W5
W6
W4
W0
W1
W2
W3
W8
q
w
r
e
t
i
o
Q0
Q2
Q1
y
u

Denon MC3000 Specifications

General

Channels	2
Jog Wheels	2
MIDI Controller	Yes
Software	Serato DJ Intro
USB Audio Interface	Yes
Outputs	RCA
Inputs	2 stereo RCA line inputs