Denon MC3000 User Manual

23
Before use Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Part names and
functions
W7 RECORD window switch button
(RECORD)
Hold down u SHIFT and press this button for
more than 1 second to assign each DECK to the
following MIDI channels.
•DECK A ............MIDI CHANNEL 13
•DECK B ............MIDI CHANNEL 15
•DECK C ............MIDI CHANNEL 14
•DECK D ............MIDI CHANNEL 16
W8 EFX window switch button (EFX)
Hold down u SHIFT and press this button for
more than 1 second to assign each DECK to the
following MIDI channels.
•DECK A ............MIDI CHANNEL 9
•DECK B ............MIDI CHANNEL 11
•DECK C ............MIDI CHANNEL 10
•DECK D ............MIDI CHANNEL 12
W9 SAMPLE window switch button
(SAMPLE)
Hold down u SHIFT and press this button for
more than 1 second to assign each DECK to the
following MIDI channels.
•DECK A ............MIDI CHANNEL 5
•DECK B ............MIDI CHANNEL 7
•DECK C ............MIDI CHANNEL 6
•DECK D ............MIDI CHANNEL 8
E0 BROWSE window switch button
(BROWSE)
Hold down u SHIFT and press this button for
more than 1 second to assign each DECK to the
following MIDI channels.
•DECK A ............MIDI CHANNEL 1
•DECK B ............MIDI CHANNEL 3
•DECK C ............MIDI CHANNEL 2
•DECK D ............MIDI CHANNEL 4
E1 Level meter display switching switch
(DECK, MASTER)
Channels displayed by the level master can be
selected from the following display modes.
DECK:
On the left channel, when A is selected using W1
DECK A/C, the volume level of control channel
A is displayed. When C is selected, the volume
level of control channel C is displayed.
On the right channel, when B is selected using
W1 DECK B/D, the volume level of control
channel B is displayed. When D is selected, the
volume level of control channel D is displayed.
MASTER:
The volume level of the master output volume
(L/R)isdisplayed.
E2 Filter cut off adjustment knob (FILTER)
Adjusts the filter cut off frequency for each
channel.
E3 Channel cue button (CUE DECK A/B/C/D)
The source of the channel selected using y
CUE is mixed with the monitor, and output to
the headphones.
E4 Channel/master level meter
Displays the volume level of the channel
selected with the E1 level meter display
switching switch.
Top panel
Q3 Q6 Q9Q4 Q5 Q7
E4
E0
E3
E1
E2
W9
Q8
W7
W5
W6
W4
W0
W1
W2
W3
W8
q
w
r
e
t
i
o
Q0
Q2
Q1
y
u

Denon MC3000 Specifications

General

Channels	2
Jog Wheels	2
MIDI Controller	Yes
Software	Serato DJ Intro
USB Audio Interface	Yes
Outputs	RCA
Inputs	2 stereo RCA line inputs