Denon MC7000 - Playing Tracks; Pitch Functions

15
To enter a crate, playlist, or library, press the Select/Load Knob when a crate, playlist, or
library is selected.
To add a track to the Prepare Crate, press Load Prep when a track is selected.
To show or hide the Prepare Crate, press and hold Shift and press Load Prep/Open Prep.
Playing Tracks
To play or pause a track loaded to a deck, press Play/Pause.
To move quickly through the track, press and hold Shift and then move the platter.
To jump to a specific location in the track, touch the desired part of the Needle Drop strip.
Pitch Functions
To adjust the speed (pitch) of a track, move the pitch fader on the corresponding deck.
To temporarily adjust the speed (pitch) of a track, do one of the following:
• Press one of the Pitch Bend –/+ buttons on the corresponding deck.
• When the Vinyl button is off, move the platter.
• While touching only the side of the platter, move the platter.
To adjust the range of the pitch fader, press and hold Shift and then press one of the Pitch
Bend –/+ buttons.
To activate or deactivate Keylock on a track, press Key Lock on the corresponding deck.
When Keylock is activated, the track’s key will remain the same (0%) even if you adjust its
speed with the pitch fader or Pitch Bend –/+ buttons.
See the Serato DJ manual to learn more about Keylock.
To activate or deactivate Key Sync on a track, press and hold Shift, and then press Key
Lock/Key Sync on the corresponding deck.
Key Sync automatically matches the deck’s key with the key of the opposite deck. You can
use this if you have installed the Serato Pitch ‘n Time DJ Expansion Pack.
See the Serato DJ manual to learn more about Key Sync.