To Next PageTo Next Page
Need help?Do you have a question about the Denon DN-MC6000 and is the answer not in the manual?
General| Type | DJ Controller |
|---|---|
| Channels | 4 |
| Frequency Response | 20 Hz - 20 kHz |
| USB Audio Interface | Yes |
| Microphone Inputs | 2 |
| Line Inputs | 4 |
| Phono Inputs | 2 |
| MIDI Control | Yes |
| Outputs | 2 x XLR (Master), 2 x Stereo RCA (Master, Booth), 1 x 1/4" (Headphones) |
| USB Ports | 1 x Type B |
| Master Output | 2 x XLR, 2 x RCA |
| Headphone Output | 1/4" |
| Software Compatibility | Serato DJ, Traktor |
| Inputs | 4 x Stereo RCA (Line/Phono Switchable) |
Ensure unit safety before customer return; check current or resistance.
Key points for safe servicing: shock, disassembly, parts, wiring.
Details on critical parts marked with symbols for safety.
Detailed audio input/output characteristics, EQ, and mic specs.
Specifications for master output, dimensions, and weight.
Overview of disassembly steps and main unit parts.
How to enter special modes for firmware, version display, and adjustments.
Procedure to check the current firmware and DSP version numbers.
How to enter and use the stand-by checking mode.
Step-by-step guide to update the unit's firmware via USB.
Guide to adjust the touch sensitivity of the jog wheels.
Information on replacing the microprocessor or flash ROM and software write-in.
Flowcharts for diagnosing power issues and blown fuses.
Flowcharts for diagnosing issues with A5V, +15V, and -15V outputs.
Flowchart for diagnosing non-functioning key operations and rotary encoder.
Flowchart for diagnosing non-operating slide switches.
Flowchart for diagnosing incorrect master output signals.
Flowchart for diagnosing incorrect output of LINE input signals.
Flowchart for diagnosing non-operating jog wheels and bend function.
Flowchart for diagnosing non-operating scratch function of jog wheels.
First part of detailed circuit diagrams for the unit.
Second part of detailed circuit diagrams for the unit.
Third part of detailed circuit diagrams for the unit.
Fourth part of detailed circuit diagrams for the unit.
