Denon DN-MC6000 - Special Mode Operations; Stand-by Checking Mode; Factory Initialize Mode

21
5. Stand-by checking mode.
(1) Pressing (PARAM.1+PARAM.2+track selction knob+CF MODE) at the same time, then turn on DN-MC6000.
(2) DN-MC6000 will enter Stand-by checking mode. Track selection knob will light.
(3) Press the track selection knob to enter Stand-by mode. Stand-by LED will light.
(4) Press RESTART to nish.
Upon completion of the adjustment, it automatically restarts, start in Normal mode.
6. Initialize
(1) Pressing (BACK+FWD+CF MODE) at the same time, then turn on DN-MC6000.
(2) Return to default setting, and these data (as follows) turn to factory default setting.
Upon completion of the adjustment, it automatically restarts, start in Normal mode.
Initialize Data Factory default Range
FADER LOCK FUNCTION OFF ON
⇔
OFF
Sensitivity of JOG wheel ±0 -4
⇔
+4
MIDI Channel 1
～
4 1
～
4
⇔
13
～
16