23
Slicer Mode
Important: Your track must have a set beatgrid for this mode to work.
In Slicer Mode, the eight pads represent eight sequential beats—“slices”—in the beatgrid. The
currently playing slice is represented by the currently lit pad; the light will “move through the
pads” as it progresses through each eight-slice phrase. You can press a pad to play that slice.
When you release the pad, the track will resume normal playback from where it would have
been if you had never pressed it (i.e., as if the track had been playing forward the whole time).
To enter Slicer Mode, press Slicer / Slicer Loop so that it lights red.
To play a slice, press the corresponding pad.
To decrease or increase the slice quantization size, use the / buttons.
To decrease or increase the Slice Domain size, press and hold Shift and use the / buttons.
Slice 1
Slice 2
Slice 3
Slice 4
Slice 5
Slice 6
Slice 7
Slice 8
To Next Page
Loading...
