5
Setup
Important: Occasionally, we may update MC7000’s firmware to improve its performance. Visit
denondj.com to check for available firmware updates, especially after you update your
software (firmware updates may address new software features).
Note: Items not listed under the Introduction > Box Contents are sold separately.
Single-DJ Performance
1. Visit denondj.com and log into your account. (Create an account if this is your first Denon
DJ product.)
2. In your account, download and install the latest version of Serato DJ.
3. Windows users only: In your account, download and install the latest Windows driver.
4. Connect input sources (microphones, CD players, etc.) to MC7000.
5. Connect output devices (headphones, power amplifiers, loudspeakers, etc.) to MC7000.
6. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) MC7000, (3) output devices.
• When ending a session, turn off (1) output devices, (2) MC7000, (3) input sources.
7. Using a standard USB cable (included), connect the USB port on MC7000 to your
computer. Open Serato DJ and go! For more information on how to use Serato DJ with
MC7000, visit serato.com/dj/support and select Denon DJ MC7000.
Computer Microphone House Loudspeakers
Power
Smartphone,
tablet, etc.
Booth Monitors
Headphones
(to front panel)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
