Denso RC8 - 5 Specifications

27
5.
Specifications
Item
Specification
Axis control
Number of
control axes
1 axis
Position
detection
method
Optical rotary encoder
Minimum
setting distance
0.01mm
Speed setting Set to 10 – 100% of parameter maximum speed.
Gripping force
setting
Set to 30 – 100% at point data.
Protective function (alarm) See “Alarm Messages”, “Error Messages”.
LED indicator
4 indicators: Power supply (green), RDY (yellow), RUN (yellow),
ALM(red)
Power
supply
Motor power
supply
24V DC ±10% 1.0A MAX
General
Operating
temperature
Conforms to robot controller installation environment.
(0 – 40 ℃)
Operating
humidity
35～85%RH（without dew condensation）
Storage
temperature
-10～+65 ℃
Protection level
Conforms to robot controller installation environment.
Vibration,
impact
9.8 m/s2 (1.0 G) or less
Altitude
1000 or less when operating
Contact life time
No contacts
Environmental load material
compliance
RoHS