4
We can provide a specially designed gripper which mechanism maintains gripping
force in the event of power-loss, as a special specification. Please contact our sales
representatives if you would like to order a such gripper.
2.1.3. Operating Environment
• Do not use this product in a place exposed to ignitable, inflammable or explosive
substances. The product has not been designed with explosion protection. The
product may explode or ignite, resulting in product damage or injury.
• Do not use the product in a place where it may be exposed to water or oil droplets.
2.1.4. Installation
Wire the product correctly by referring to the operation manual. Securely connect the cables
and connectors so that they will not be disconnected or come loose. Failure to do so may
cause the product to malfunction or cause fire.
2.1.5. Operation
• When operating or adjusting the gripper after it was mounted to the system (machine,
robot, etc.), be sure to observe safety measures for the system. Failure to do so may
result in serious injury.
• Before supplying power to and operating the product, always check the operation
area of the equipment to ensure safety. Supplying power to the product carelessly
may cause electric shock or injury due to contact with the moving parts.
• Do not touch the connectors or other parts power being supplied to the product. It
may result in electric shock or malfunction.
• If you are using a pace maker or other mechanical implant, do not come within one
meter of the product. The strong magnetic field generated by the product may cause
the pace maker, etc., to malfunction.
Keep pacemaker wearers one meter away from
the product. The pacemaker may not work properly due to strong magnetic affection.
• Do not pour water onto the product. Spraying water over the product, washing it with
water or using it in water may cause the product to malfunction, resulting in injury,
electric shock, fire, etc.
• When conducting operation checks or performing operation, increase the robot
speed gradually to check whether the electric gripper gripping force can be sustained
relative to the robot speed. If not, there is a possibility of danger such as flying
workpieces.
To Next Page
Loading...
Need help?
General
