Need help?Do you have a question about the DENT Instruments PowerScout 3 HD and is the answer not in the manual?
General| Model | PowerScout 3 HD |
|---|---|
| Category | Measuring Instruments |
| Communication Interface | Ethernet, RS-485 |
| Display | LCD |
| Measurement Type | Power, Energy, Voltage, Current |
| Power Range | Depends on voltage and current ranges |
| Channels | 3 |
| Communication | Modbus RTU |
| Weight | 0.27 kg |
| Operating Temperature | -10 to 60°C |
| Storage Temperature | -20 to 70°C |
| Input Current Range | 0.1-5A (direct), up to 5000A (with CTs) |
| Current Range | 0.1-5A (direct), up to 5000A (with CTs) |
Details on how to unpack the PowerScout HD meter and its components.
Identifies and illustrates the connectors and user interface elements of the PSHD meter.
Safety guidelines for installing current transformers in panel boards and switchgears.
Requirements for safe installation of PSHD meters, including wiring and conductor usage.
Outlines the importance of pre-installation configuration and necessary tools.
Describes the typical tasks involved in the physical installation of the meter by an electrician.
Step-by-step guide for installing the ViewPoint HD software on a computer.
Explains the different connectivity methods available when launching the ViewPoint HD application.
Details on connecting the PSHD meter to a computer via USB for power and communication.
Instructions for connecting the PSHD meter using Ethernet for configuration and data transfer.
Describes the features and functionality of the ViewPoint HD application for meter setup.
Guides on setting up electrical parameters like voltage input, service type, and CTs within ViewPoint HD.
Instructions on how to set up and manage alarm conditions for voltage and current measurements.
Explains how to set the meter's internal real-time clock using ViewPoint HD.
Step-by-step process for updating the PSHD meter's firmware using ViewPoint HD.
Illustrates different physical form factors and mounting options for DENT PowerScout HD meters.
Provides a step-by-step guide for physically installing the meter in wall-mount enclosures.
Illustrates wiring configurations for a 3-wire, single-phase split service panel.
Covers essential criteria and placement guidelines for current transformers used with the meter.
Diagrams and explanations for connecting PSHD meters on an RS-485 multidrop network.
Explains how the meter uses DHCP for automatic IP address assignment over Ethernet.
Details on configuring a static IP address for the meter, often for RTU communication.
Configuration parameters for Modbus RTU communication, including device addressing.
Discusses PIN protection and access control for meter interfaces.
Describes checks to ensure correct CT phasing and voltage connections after installation.
Explains how registers are organized into functional groups based on the SunSpec Modbus interface model.
Provides tables for configuring element and channel registers for various electrical service types.
Details on using IEEE 754 floating-point numbers for meter registers and data types.
Step-by-step guide for new users installing ViewPoint HD software.
Alternative installation method for ViewPoint HD requiring manual driver setup.
Guidance on resolving common issues encountered during ViewPoint HD software installation.
Lists safety and compliance certifications for the PSHD meter, including FCC, UL, and CSA.
To Next Page
