SAFETY
2-2 15 Jun 12
HyperPoolShaker
Equipment Handling
WARNING! USE SPREADER BARS TO PREVENT DAMAGE W
HEN LIFTING
WARNING! TO ENSURE PROPER BALANCE AND ORIENTATION WHEN UNIT
IS RAISED AND PREVENT DAMAGE TO COMPONENTS, ATTACH LIFTING
SLING ONLY AT DESIGNATED LIFT POINTS. DO NOT ATTEMPT LIFTING BY
ATTACHMENT TO MOTOR OR ANY OTHER LOCATION.
WARNING! BE SURE THAT HANDLING DEVICES HAVE SUFFICIENT LIFTING
CAPACITY TO SAFELY HANDLE THE WEIGHT OF THE EQUIPMENT.
WARNING! DO NOT REMOVE SHIPPING BRACKETS UNTIL EQUIPMENT HAS
BEEN POSITIONED AT FINAL INSTALLATION SITE.
Operation
HOUSING BECOMES HOT DURING OPERATION AND
MAY CAUSE SEVERE BURNS. DO NOT TOUCH MOTOR HOUSING DURING
OPERATION
OR IMMEDIATELY AFTER MOTOR HAS BEEN OPERATING.
WARNING! ALL OPERATING AND MAINTENANCE PERSONNEL MUST READ
AND UNDERSTAND ALL SAFETY INFORMATION
IN THIS MANUAL BEFORE
WORKING WITH THE EQUIPMENT.
WARNING! BE SURE THAT ALL PERSONNEL ARE CLEAR OF MACHINE
BEFORE ADJUSTING ANGLE OF SCREEN BED.
HANDS AND FEET CAN BE
THE MOVING SCREEN FRAME.
WARNING! DO NOT ATTEMPT TO OPERATE EQUIPMENT W
ITH SHIPPING
.
Maintenance
WARNING! HIGH VOLTAGE MAY BE PRESENT. ALWAYS OPEN FUSED
DISCONNECT SUPPLYING ELECTRIC POWER TO THE EQUIPMENT, AND
LOCK OUT AND TAG OUT POWER SUPPLY BEFORE PERFORMING ANY
MAINTENANCE AND/OR ADJUSTMENTS OF EQUI
PMENT.
GRINDING, BURNING, OR WELDING WILL PRODUCE
HAZARDOUS GASES AND DUST. ALWAYS WEAR PROPER PPE WHEN
PERFORMING ANY OF THESE PROCEDURES.
To Next Page
Loading...
Need help?
General
