DERRICK HYPERPOOL SHAKER User Manual

OPERATING INSTRUCTIONS
15 June 12 4-7
HyperPoolShaker
Figure 4-4. Screen Frame Pooling Area
ANGLE ADJUSTMENT
The angle of the discharge end of the screen frame is infinitely adjustable within the equipment’s
available range. To adjust the AWD, proceed as follows:
WARNING! BE SURE THAT ALL PERSONNEL ARE CLEAR OF MACHINE
BEFO
RE ADJUSTING ANGLE OF SCREEN BED.
1. Pivot operating handle (Figure 4-5) downward until horizontal, and set jack screw ratchet
detent to either raise or lower discharge end of screen frame.
2. Using the operating handle, rotate jack screw left to raise or right to lower screen frame end to
the desired angle. Use stamped markings on the upright shafts to assist in determining
angular setting.
Figure 4-5. Manual Jack Screw AWD Adjustment

DERRICK HYPERPOOL SHAKER Specifications

General

Brand	DERRICK
Model	HYPERPOOL SHAKER
Category	Engine
Language	English