SECTION 2 - SAFETY
15 Jun 12 2-1
HyperPoolShaker
INTRODUCTION
This section contains a summary of WARNINGS used in this manual and a list of material safety
data sheets applicable to the equipment. The HyperPool shaker has been designed to perform
the stated functions safely.
WARNINGS
All persons responsible for operation and maintenance of this equipment must read and
understand all safety information in this manual prior to operating and/or maintaining the
equipment. The safety warnings listed below are included in applicable procedures throughout
this manual.
Sound
WARNING! TO PROTECT AGAINST HEARING LOSS, HEARING PROTECTION
SHOULD BE WORN AT ALL TIMES WHEN WORKING ON OR NEAR DERRICK
MACHINES.
Electrical Hazards
WARNING! TO AVOID SERIOUS PERSONAL INJURY BE SURE THAT
EQUIPMENT IS DE
-ENERGIZED, LOCKED OUT, AND TAGGED OUT PRIOR
TO PERFORMING MAINTENANCE AND/OR ADJUSTMENTS.
WARNING! MOTOR MUST BE OPERATED AT THE DESIGNATED SUPPLY
VOLTAGE.
WARNING! HIGH VOLTAGE MAY BE PRESENT. BE SURE THAT FUSED
DISCONNECT SUPPLYING ELECTRIC POWER TO THIS EQUIPMENT
IS
OPEN. LOCK OUT AND TAG OUT POWER SUPPLY TO PREVENT
ACCIDENTAL APPLICATION OF POWER WHILE MAINTENANCE AND/OR
ADJUSTMENTS ARE IN PROGRESS.
WARNING! ELECTRICAL CONNECTIONS MUST BE MADE IN ACCORDANCE
WITH THE NATIONAL ELECTRICAL CODE (NEC) AND ALL APPLIC
ABLE
LOCAL CODES. FAILURE TO COMPLY MAY RESULT IN AN UNSAFE
CONDITION THAT COULD INJURE PERSONNEL AND/OR DAMAGE
EQUIPMENT. ENSURE THAT ALL ELECTRICAL AND CONDUIT
CONNECTIONS ARE SECURE.
To Next Page
Loading...
Need help?
General
