DERRICK HYPERPOOL SHAKER User Manual

SGX VIBRATOR MOTOR
15 Jun 12 7-5
HyperPoolShaker
REMOVAL AND INSTALLATION
The removal and installation procedures below include photos for a typical motor. While motor
appearances vary between the models covered, these differences do not affect removal and
installation.
Tool Kits
Tool kits containing all necessary equipment for removing and installing motor bolts are available
from Derrick. Kit part numbers are as follows:
Part No.
Description
Kit No. G0003029 - 3/4” Hex Hd Bolt
G0002020
Torque Wrench, 200-600 ft-lbs, 3/4” Drive
G0003026
Extension, 3/4” Drive x 8” Lg
G0003027
Deep Socket, 3/4” Drive x 1-1/8”
G0003028
Box End Wrench, Offset, 1-1/8”
G0003030
Breaker Bar, 3/4”
Kit No. G0002161 - 1” Bolt With 5/8” Socket Hd
G0002020
Torque Wrench, 200-600 ft-lbs, 3/4” Drive
G0001941
Deep Socket, 3/4” Drive x 1-7/16”
G0002160
Hex Bit Socket, 1/2” Drive x 5/8”
G0002163
Breaker Bar, 1/2” Drive
842-06
Box End Wrench, Offset, 1-7/16”
Kit No. G0002162 - 1” Bolt With 3/4” Socket Hd
G0002020
Torque Wrench, 200-600 ft-lbs, 3/4” Drive
G0001941
Deep Socket, 3/4” Drive x 1-7/16”
G0002164
Hex Bit Socket, 1/2” Drive x 3/4”
G0002163
Breaker Bar, 1/2” Drive
842-06
Box End Wrench, Offset, 1-7/16”

DERRICK HYPERPOOL SHAKER Specifications

General

Brand	DERRICK
Model	HYPERPOOL SHAKER
Category	Engine
Language	English