22
SEATING SYSTEM
Fitting the seating system onto the body
The seat depth can be adjusted. This is colour-coded and
matches the colour-coded seat angle holes on the body.
Information on how to set the seat depth, tilt-in-space, and recline
the backrest can be found on page 33.
1. Check the harness straps are
fastened within the seating system.
This will prevent them getting caught as
the seat is tted, adjusted or removed.
2. Turn the white dial fully anti-
clockwise to unlock the seat.
3. Lift the folded seat by
holding the straps, with your
ngers under the white dial
and with your thumb pressing
on the black seat release
knob above.
4. Lift the seat by the white
dial or the harness. Do not
lift by the headrest! Lower
the front pins into the metal,
angled slot. Then, lower the
rear of the seat until it sits
on the seat grid brackets.
Press down on the black seat
release knob, then lower and
locate on the black seat.
To Next Page
Loading...
