23
5. Now rotate the dial fully
clockwise to lock the seat into
position. If there is resistance
turning the white dial into the
locked position, the pegs may not
be properly engaged. Re-adjust
the seat again to allow the pegs
to engage and try to lock the dial
again. Do not force the white
hand dial into position.
Do not use the seat unless the
white dial is securely in the
locked position. The black spot
will point down when the seat is in
a locked position (as shown to the
right).
6. Connect the joystick and carer
controls to the sockets on the
rear of Wizzybug. The connector
will only t one way around. The
sockets are interchangeable.
Hook the carer control onto the
back of the headrest.
To Next Page
Loading...
