31
Adjusting the seat depth when it is out of the Wizzybug body
Please note that it is easier to adjust
the seat when it is tted in the
Wizzybug body.
To adjust the seat when it is
removed from Wizzybug, rstly
push the backrest down and slide
it along to nd the seat depth slot
on the seat base.
Ensure that the sticker semi-circles are in alignment.
Sliding the seat towards you may be easier. Note the click when
the seat is locked in position.
ADJUSTING THE SEAT WHEN IT IS FITTED IN THE
WIZZYBUG BODY
The child must not be seated in Wizzybug when any seat
adjustments are made.
• Move the seat one seat position at a time.
• Removing the armrests will make adjusting the seat easier.
• It is easier to start by engaging in one of the top holes in the seat
angle grid. You can then readjust back or down to select the hole
required for the seating position you are trying to achieve.
• When the seat is engaged the locking mechanism will work freely.
• Seat base depth adjustment should always be done using the
top holes in the grid. When the required seat depth is reached,
the seat can then be located in the desired tilt position.
To make the seat depth longer you will
need to move the backrest backwards.
1. Unlock the backrest by turning the white dial on
the seat fully anti-clockwise.
!
Fig 18 Sticker semi-circles
To Next Page
Loading...
