Technical Specification - CONFIDENTIAL - Page 11 of 21
DESKO ICON Scanner
®
Doc # 7 001 140 101 Doc.-Rev.: 2016-11-09
5.3 Version Control
For maintenance, the device must be connected to a PC via the USB host port. Most
maintenance functionality is available via the DESKO Scan API and therefore can be
integrated directly into the customer application or environment. DESKO also provides
dedicated tool sets which are part of the ICON software package (DESKO Device Updater)
or can be obtained from DESKO on request.
The following are common maintenance tasks:
• Read out detailed information about firmware, device or software version.
• Update the firmware.
• Set the RFID tuning (not part of the API).
To Next Page
Loading...
